Contact us

Case Studies

IPEC have installed systems and conducted tests on thousands of asset, here we cover some highlights.

PD on 13.8kV busbar

A case study discussing partial discharge damage found on a 13.8kV busbar.

Find out more

PD-SGS/PD Detector on site

Utility, Middle East – Detecting Pending Asset Failure

This case study will detail how IPEC’s PD-SGS detected a pending asset failure in a Middle East utility company.

Find out more

The ASM ipec - UK airport

Airport, UK – Asset Monitoring

In 2018, following a recent high voltage failure, IPEC were tasked with finding a condition monitoring solution at an airport in London.

Find out more


Oil Company, UK – Partial Discharge Detected & Located on 33kV Assets

A sharp increase of Partial Discharge activity was detected on a 33kV switchgear panel by IPEC’s on-line PD Monitoring system, the ASM. High TEV PD signals were detected across the switchboard.

Find out more

chemical company

Chemical Company, South Korea – Fault Prevented

IPEC kept a close eye on the rise, and the criticality went from 0 to 100 in a very short period of time meaning a failure was imminent.

Find out more

Saudi faulty cable

Utility Company, Middle East – Cable PD Detected

The examination showed extensive PD damage around the trifurcating point of the termination.

Find out more

oil company south korea ipec

Oil Company, South Korea – IPEC ASM Detects Partial Discharge

IPEC conducted an annual data analysis report for the client, and it concluded there were high levels of Partail Discharge on cable EA4800B.

Find out more


Seoul transport company, South Korea – PrecisePD Located PD on Cable

IPEC conducted Partial Discharge cable mapping for the customer in Seoul using the PrecisePD location and detection system.

Find out more


Utility, UK – Fault Prevented in 33kV Switchgear

Partial Discharge spot testing was carried out in the 33kV substation.

Find out more

Switchgear PD Detection and Location

Client Engineers carried out routine tests on MV switchgear and accessories using IPEC’s PD-SGS instrument.

Find out more

Utility, London – 132kV Cable Termination Fault Prevented

A 132kV cable termination into a 132/11kV transformer at a large central London substation failed in Nov 2011, causing extensive damage.

Find out more

The placeholder featured image.

Steel Plant – PD Location

In early 2009, one of the monitored cables in the steel plant experienced rapidly increasing levels of discharge activity.

Find out more

pd monitoring equipment from ipec

Rural Substation – Faulty VT Contacts

On 20th Sept 2012, PD initiated in the switchgear of a transformer panel at the substatio

Find out more

hv cable monitoring for ipec

HV Cable Monitoring

The system provides permanent monitoring for partial discharge of the cable insulation, cable joints and the terminations.

Find out more

discharging-RRUMs london stadium ipec

Olympic Park – Discharging RMUs

As part of a scheduled test program, IPEC carried out PD testing on all 170 RMU switches in the distribution network on the Olympic Park.

Find out more

permanent pd monitoring system for ipec

Crossrail – Partial Discharge Monitoring of MV Switchgear

Partial discharge tests carried out in Oct 2012 showed that the switchboards were free from PD.

Find out more

No Results Found :(